How do you maintain longboard bearings?

Do you need to oil longboard bearings?

You don’t need much lube in there so don’t go too crazy! The thinner your lube, the faster your bearings will spin, but the more prone to destruction they will be. Oil makes your bearings mega fast, but if any crap at all gets in there your bearings will be toast.

How often should you clean your longboard bearings?

Remember, bearings only need to be cleaned about once every two to three months depending on the environment you are skating in. If you primarily skate inside several times a month but the surface is not cleaned often, you might have to shine up your bearings once a month.

Should I clean my longboard bearings?

If your bearings start to feel rough, noisy, or are visibly dirty, it’s time for a clean up! Bearings should also be cleaned when there is a noticeable slow in speed or been exposed to moisture. Make sure you are in a well ventilated area. … With the bearing on the inside of the wheel, gently pull back.

THIS IS INTERESTING:  What happened to Gold Canyon?

Can I use Vaseline to lube my bearings?

Vaseline will melt when hot. From friction. Use a grease. Automotive wheel bearing grease will work fine, or marine waterproof grease.

Can you use WD40 to clean bearings?

NO. WD40 is a degreaser – not a grease!! The object of cleaning your bearings is to remove all the grease, clean the bearings, then add grase back in. Spraying WD40 will remove the old grease, but it won’t clean your bearings, and it won’t regrase them afterwards.

Can I use rubbing alcohol to clean my bearings?

After you’ve let your skateboard bearings soak in the cup of isopropyl alcohol for at least 30 mins, take each bearing out individually and use a paper towel to wipe them clean and dry. … If you’re fortunate to have access to compressed air, apply it now to really clean the hard to reach areas inside the bearings.

What household items can you use to lube bearings?

If you don’t have a skate bearing lubricant at home, you can use either sewing machine oil or oil for electronic gadgets. Don’t use motor oil, WD-40, petroleum jelly, or cooking oil because they’re unsuitable for bearings. Also, be careful of the amount of oil you’ll be putting on each bearing.

What is the best oil for bearings?

Lithium based greases are very popular as bearing grease due to their water resistance and performance characteristics in both high and low temperatures. Greases comprised of synthetic lubricating fluids perform well in extreme low and high temperature ranges.

How long do skate bearings last?

Three things that will trash bearings are 1) Lots of water and 2) Jumping off stuff 3) Sliding. If you don’t skate in the wet, your bearings should last at least a year or two of cruising around, if not longer. If you do skate in the wet, make sure you clean your bearings regularly.

THIS IS INTERESTING:  What are the cons of scuba diving?

Can I use acetone to clean bearings?

Pour enough acetone into the container to cover the bearings. Place inside and securely fasten the lid. (Follow the instructions with your cleaning kit carefully). You can leave them to soak and give them a good shake to remove all the dirt.

Can you use vinegar to clean bearings?

Pour enough white vinegar into a jar so that the bearing can be completely submerged. Make sure you use WHITE vinegar, not cider or balsamic. This is not a salad. Now Place bearing into the vinegar.

Can you use 3 in 1 oil on skate bearings?

This 3-in 1 oil for skateboard bearings paved the way for the easy and convenient upkeep of my bearings. It reaches what you can’t and simply gives you the best value for your money.

Are Sector 9 Bearings good?

The sector 9 bearings were much less in price, but they are hands down faster than the Reds. They are best bearings for the price. You’d have to spend $80 to get a better bearing.