Frequent question: Why is one of my wheels on my skateboard off the ground?

Why is one of my skateboard wheels not touching the ground?

with new trucks, the bushings have to be broken in. With your weight on the board, all wheels should be on the ground. Once broken-in, the board will still naturally go in the direction you usually go. If you tend to be heavy on the left it’ll roll left and so on.

Why is my skateboard wheel off the ground?

it’s the BOARD. its twisted lenghtwise, from moisture during shipping or something. your board is warped. if the wheel is only like, a tiny bit off the ground, no deal, you probably wont even notice.

Does it matter which way the wheels go on a skateboard?

With all the bearings set into the wheels, put your wheels on your trucks. It doesn’t matter if you have the graphic side of your wheels facing out or not—that’s up to you.

How tight should skateboard wheels be?

Your skateboard wheels should be tight enough that they spin freely. However, you don’t want the wheels so loose that they wiggle on the truck’s axle. … If the wheel stops spinning after a few seconds, you’ll want to loosen them.

How do you evenly tighten a truck?

Use a skate tool or other useful tool to tighten or loosen the big nut in the center of the truck. This single bolt controls the tightness of the trucks. It points directly to the ground when you’re skating, and is found between the wheels. Turn it clockwise to tighten the trucks, getting tighter turning.

THIS IS INTERESTING:  Quick Answer: What country invented mountain biking?

Do you need speed rings on a skateboard?

Speed Rings are an often overlooked part of your skateboard, but not having them could be greatly jeopardizing your performance! Speed rings go on the outside of your bearings to give more clearance, allowing an uninhibited continuous roll.